MD-40 mid-frequency inverter resistance welding machine

MD-40 Intermediate frequency welding machine ISO9001:2000 CCC Juntengfa is one of China's top ten welding manufacturer MD-40 Intermediate frequency welding machine description:1.Welding current for the DC,when the secondary windings in the induction/a magnetic material will not be affected by welding. 2.So that the load-balancing power supply equipment:frequency inverter welder convex point on the use of three-phase power grid voltage drop fluctuations and greater adaptability.3.More precise,fast current control:frequency systems and more,a more accurate analysis of parameters.4.Faster to set up current:IF in the regulation of welding current technology faster than traditional 20-fold.5.Process more reliable:the majority of the application of solder DC welding metal effect will be even better.6.Reduce operating costs,including energy savings each and every point of welding as well as shortening the welding cycle.7.Save energy:especially suitable for welding thick workpieces and high-conductivity metal.such as aluminum and galvanized steel sheet,such as all.MD-25 Intermediate frequency welding machinePrimary technical parameters:

 

ITEM		MD-10		MD-20		MD-25		MD-32		MD-40
Rated Voltage	AC 380V, 3φ,50/60Hz
Contactor	600V, 16A		600V, 100A		600V, 200A		600V, 200A		600V, 250A
Fuse	16A		100A		200A		200A		250A
Rated Power(kVA)		8		50		70		80		90
Duty Cycle(%)		50
Output OC Voltage(V)		7.9		11.9~13.9
Output SC Current(KA)		10		20		25		32		40
Electrode Stroke(mm)		50		80
Electrode Arm Gap(mm)		120		310		300
Electrode Arm Length(mm)		120		460
Max Electrode Pressure(N)		1100		4700		4700/7300
Compressed Air Pressure(MPa)		0.6
Pressure	1.5~3kg·f/cm2
Flow (L/min)	6		15		25		30		30
Temperature(0C)	Incoming Water, lower than 20°C
Resistivity(KΩ.cm3)	>5
Thickness M.S.(mm)		1.5+1.5		3.0+3.0		4.5+4.5		5.0+5.0		5.0+5.0
Dimension(LxWxH)(mm)		940x500x1290		1220x825x1680		1225x860x1700
Controller Model		SL-MF110

 

MD-40 mid-frequency inverter resistance welding machine